How to Flash Stock Rom Using Smart Phone Flash Tool (SP Flash Tool)

Here are the instructions about flashing your mobile phones safely, In this post you can read about how to flash your mobile using SP Flash Tool on your windows Pc.

Requirements: Before flashing your mobile, remember to charge your phone more than 50% battery because its take some time while flashing.

How to Flash Stock Rom Using Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download Related USB Driver, extract the files and install on your pc.

Step 2: Switch Off your Mobile phone and remoe the battery.

Step 3: Download the Stock Rom Flashing tool on your pc and extract it.

Step 4:Now run the program file name with Flash_tool.exe.

Step 5: When SP Flash tool open, click on Download button.

Step 6: Visit the Download button and click on scatter-loading tab.

Step 7: Now find the Scatter File

Step 8: Click on Download button to start flashing.

Step 9: Then, Connect your mobile phone to your pc via usb cable, after that use Volume Up and Down key to locate your smart phone easily by computer.

Step 10: When flashing is done , a Green Ring will show.

Step 11: Now close the flash tool and remove your mobile from pc.

Note: All the files password is firmwarefile.com

How to flash CPB firmware using YGDP Tool
These are the guidelines on the most
How to use Broadcom MultiDownloader to flash firmware
These are the guidelines on the most
How to flash Stock Rom using DFU
These are the directions to Flash Stock
How to flash Pac Stock Rom on Android Smartphone
These are the guidelines to streak Pac

Comments are closed.

Must read×

Top
%d bloggers like this: